IntermediateLesson 16 of 306 min read

Social Media for Bloggers

Use social media to bring readers to your blog: repurpose one post several ways, tag links, and rank channels by signups per hour with a worked example on made-up data.

In this lesson you will

  • Say what social media is good for
  • Repurpose one post several ways
  • Tag links to measure channels
  • Rank channels by results per hour

About 24 minutes

Priya and the four platforms

Priya has an account on a video app, a photo app, a pin board and a local gardening group. Each wants posts every day. If she tries to do all four properly, she will have no time to write. Social media can send readers to a blog and help people find it, but it is a hungry master. This lesson is about choosing where to spend limited hours and measuring what comes back.

What social media is good for

  • Meeting readers where they already are. A helpful answer in a group can lead people to your post.
  • Showing the person behind the blog. A photo of the plot builds familiarity.
  • Giving a post a second life. A good post can be told in several ways over several weeks.
  • Hearing questions. Comments are a free source of post ideas.

It is less good as a home for your work. You do not own the audience, the rules change, and a post is seen for a short while. So the aim is usually to bring people back to your own site and your email list.

Repurpose, do not duplicate

Instead of writing new things for every platform, take one post and cut it up. A single post on starting seeds could give a photo of the best tray, a three-step tip, a short clip of watering, a question to the group and a quote graphic. Each links back to the post. Write once, share five ways, and wait a few days between them. Tailor each to the place: a group wants a helpful answer, not an advert.

Track what works, per hour

Do not judge a channel by how it feels. A channel that gets many views but no signups may be a poor use of an evening. The program below takes a made-up month of results for four channels, with the hours spent, the clicks to the blog and the email signups. It ranks them by signups per hour. It also builds a tagged link, with one part per line, which is how a blog knows where a visitor came from.

from urllib.parse import urlencode, urlparse, parse_qs

# MADE-UP month of results: (channel, hours spent, clicks, signups)
channels = [
    ("short video", 10, 140, 6),
    ("photo posts", 6, 90, 5),
    ("community group", 3, 70, 9),
    ("pins", 4, 120, 2),
]
ranked = sorted(channels, key=lambda r: r[3] / r[1], reverse=True)
for name, hours, clicks, signups in ranked:
    print(f"{name:16}{signups / hours:.2f} signups an hour")
tot_h = sum(r[1] for r in channels)
tot_s = sum(r[3] for r in channels)
print("total hours:", tot_h, "| total signups:", tot_s)
print("best share of signups:", ranked[0][0], f"{ranked[0][3] / tot_s:.0%}")

# a tagged link, one part per line
base = "https://plot14.example/start-seeds/"
tags = {"utm_source": "community", "utm_medium": "social",
        "utm_campaign": "seed-week"}
url = base + "?" + urlencode(tags)
back = parse_qs(urlparse(url).query)
for k in tags:
    print(k, "=", back[k][0])
print("round trip OK:", {k: v[0] for k, v in back.items()} == tags)
community group 3.00 signups an hour
photo posts     0.83 signups an hour
short video     0.60 signups an hour
pins            0.50 signups an hour
total hours: 23 | total signups: 22
best share of signups: community group 41%
utm_source = community
utm_medium = social
utm_campaign = seed-week
round trip OK: True

Priya spent 23 hours in total and gained 22 signups. The surprise is the winner. The local community group gives 3.00 signups an hour, far ahead of photo posts at 0.83, short video at 0.60 and pins at 0.50. It produced 41 per cent of all signups for just three of the 23 hours. The video channel took ten hours, the most of all, and returned among the least. This is made-up data, but it shows the point: effort and result are often unrelated, and only measuring tells you.

Notice what this does not say. It does not say video is bad for everyone, and a bigger, longer test might change the order. A month is a short sample, and signups are a small count, so one lucky week can swing the ranking. Treat the result as a reason to try more of what works and fewer hours of what does not, then measure again.

Tagged links

The second half of the program builds an address ending with three tags: where the visitor came from, what kind of channel it was and which campaign. Analytics tools read these tags and report them, so you can tell your group traffic from your video traffic. The program splits the address back into its parts to prove the tags survive. Keep the names lower case and consistent, or the same channel will appear under several spellings in your reports.

  1. Pick one or two channels where your readers already are.
  2. Share each post in two or three different ways, spaced out.
  3. Tag every link back to your blog so you can measure it.
  4. Review once a month: signups per hour, not likes.
  5. Drop the weakest channel and spend its hours writing.

Be a good guest

Groups and communities have rules, and many ban promotion. Read them first, help people for a while before sharing your own work, and never post the same link in a dozen places at once. If a platform or a company gives you something to promote a product, you must say so clearly, which lesson 18 covers. Being useful is what turns a stranger into a reader.

Common mistake: being everywhere

Spreading yourself across every platform and posting rarely on all of them. One channel done steadily beats four done badly, and it leaves time for the writing that gives you something to share.

Sample data only

The channels, hours and signups are made up, and results vary widely between people, places and months. Platform rules and features change often, so check each one’s current guidance.

Choose one channel. Take your best post and write three different shares for it. Tag the links and note the date you will review them.

Practice for this lesson

Check what you learned

Five quick questions. Pick an answer and you will see straight away whether it is right and why.

Why repurpose one post instead of writing new things everywhere?

  1. It breaks the rules
  2. It hides the post
  3. It earns money
  4. It saves time and keeps your message consistent

One post can become several shares with far less work.

Which measure did the program rank channels by?

  1. Signups per hour
  2. Likes
  3. Followers
  4. Colour

Signups per hour compares results against effort.

Which channel won in the sample month?

  1. Short video
  2. Pins
  3. The local community group
  4. Photo posts

It gave the most signups for the fewest hours.

Why keep tag names lower case and consistent?

  1. To save space
  2. To hide traffic
  3. To block ads
  4. So one channel is not reported under several spellings

Inconsistent tags split one channel into several rows.

Why be careful with one month of data?

  1. It is always exact
  2. It is a small sample that one lucky week can sway
  3. It proves a channel is bad
  4. It costs money

Small counts are noisy, so measure again before deciding.

Summary

  • Use social media to bring people to your site and list.
  • Repurpose one post several ways instead of writing everything new.
  • Tag links and measure signups per hour.
  • Be a good guest, and say when something is promoted.

Next lesson

Lesson 17 looks at analytics and what to measure.

Questions

Which platform should I pick?

The one where your readers already spend time and where you can be useful. Ask your readers, and test one or two channels for a month.

Should I buy followers or likes?

No. Bought numbers are not real readers, break most platforms' rules and give you nothing measurable. Earn a small, real audience.

How often should I post?

As often as you can keep up with without hurting your writing. A steady, smaller rhythm beats bursts followed by silence.

Progress is saved in this browser.