Writing Your First Post
Use a simple shape for a first post, then measure a draft for length, sentence size, reading ease and reading time using a real program and a research-based reading speed.
In this lesson you will
- Plan a post with a clear shape
- Write the outline first
- Measure words, sentences and reading ease
- Estimate reading time from a research-based speed
About 22 minutes
Priya stares at a blank page
The blog is built, and Priya has a title in mind: how to start seeds on a windowsill. She opens the editor and freezes. What helps is a shape to fill in. A useful post is not a pile of sentences. It has a job, a reader, a structure and an ending. This lesson gives you a simple structure for a first post and a way to measure a draft, so that you can see how long it is, how easy it is to read and whether it is divided clearly.
A simple shape
- The reader and the promise. Say who the post is for and what they will be able to do after reading it.
- A short opening. Two or three sentences: the problem, why it matters, and what is coming.
- The body in sections. Each section has a clear sub-heading and does one job.
- A useful ending. A summary, a next step or a question for the reader.
- One piece of proof. A photo, a number or a real result from your own experience.
Write the headings first, as an outline, and then fill each section. That way you always know what you are writing next, and a half-finished post is still a usable outline.
Measure the draft
The program below takes a made-up draft of Priya’s post, with five sub-headings, and measures it. It counts words and sentences, works out the average sentence length, and estimates a reading ease score, which is the well-known Flesch formula: it rewards short sentences and short words. It estimates the reading time using 238 words a minute, the average silent reading speed for adults reading English non-fiction in a large 2019 review of 190 studies; individual readers vary a lot, from about 175 to 300. The syllable counting in the program is a rough rule, so the score is an estimate.
import re
draft = """## Why I start seeds indoors
Starting seeds on a windowsill is the cheapest way to get a head start on the growing season. I started my first tray of tomatoes in March, and the plants were ready to go outside by the end of May. The seeds cost very little, and the trays are just old fruit boxes.
The most important thing is light. A south-facing window works well, and you can turn the tray each day so that the seedlings do not lean. If they stretch and go thin, they need more light.
## What you need
You need a tray, some seed compost, a spray bottle and a label for each variety. Do not use garden soil, because it is heavy and can carry weeds and disease. Fill the tray, press the compost down gently, and water it before you sow.
## How to sow
Sow two seeds in each cell and cover them lightly. Keep the compost damp but never soggy, and keep the tray somewhere warm. Most seeds come up within two weeks. When the first true leaves appear, remove the weaker seedling and keep the strong one.
## When to move them outside
Harden the plants off over a week by putting them outside for a few hours each day. Watch the forecast for frost, because one cold night can undo months of work. Plant them out when the nights stay mild.
## Next steps
Write down the date you sowed each variety. Next year you will know exactly when to start."""
body = "\n".join(l for l in draft.splitlines() if not l.startswith("##"))
words = re.findall(r"[A-Za-z']+", body)
sentences = [s for s in re.split(r"(?<=[.!?])\s+", body.replace("\n", " ")) if s.strip()]
def syl(w):
w = w.lower()
n = len(re.findall(r"[aeiouy]+", w))
if w.endswith("e") and not w.endswith("le") and n > 1:
n -= 1
return max(1, n)
sy = sum(syl(w) for w in words)
wps = len(words) / len(sentences)
flesch = 206.835 - 1.015 * wps - 84.6 * sy / len(words)
print("words:", len(words))
print("sentences:", len(sentences))
print("average sentence:", round(wps, 1), "words")
print("reading ease:", round(flesch))
print("reading time at 238 wpm:", round(len(words) / 238 * 60), "seconds")
heads = [l for l in draft.splitlines() if l.startswith("##")]
print("sub-headings:", len(heads))
print("words per section:", round(len(words) / len(heads)))
words: 236
sentences: 18
average sentence: 13.1 words
reading ease: 88
reading time at 238 wpm: 59 seconds
sub-headings: 5
words per section: 47
The draft has 236 words in 18 sentences, an average of 13.1 words per sentence, which is short and clear. Its reading ease is about 88, which on this scale means easy to read, suitable for a general audience. The reading time is about 59 seconds, so a reader will finish in a minute. There are 5 sub-headings, giving about 47 words per section, which suits phones, where long grey blocks of text are tiring. The numbers do not tell you the post is good. They tell you it is not hard to read and not badly organised, which is a useful starting point. The next question is whether it is useful, and only a reader or an honest friend can tell you that.
How long should a post be?
There is no right length. Write what the topic needs and then stop. A clear answer in 600 words beats a padded one in 2,000. Some topics, such as a full guide, do need more. Search engines do not reward length for its own sake, and what they aim to show is content that helps people.
- Open fast. Do not spend three paragraphs clearing your throat.
- Use plain words. Say ‘use’ rather than ‘utilise’.
- Show, then tell. A short example does more than a paragraph of advice.
- Write like you talk to a friend. Then edit, which lesson 6 covers.
Trying to write and edit at the same time. You stop after every sentence to fix it, and nothing flows. Get the whole draft down first, then change it.
If you use an AI writing tool to help with ideas or outlines, you remain responsible for the facts and for your own voice. Check everything, and do not present as your own experience something you have not done.
Practice for this lesson
Check what you learned
Five quick questions. Pick an answer and you will see straight away whether it is right and why.
What should you write first?
- The conclusion only
- The image captions
- The headings, as an outline
- The links
An outline gives you a shape to fill.
What does a higher reading ease score mean?
- The text is longer
- The text has more images
- The text is older
- The text is easier to read
The Flesch score rises with shorter sentences and words.
What reading speed does the lesson use?
- 1,000 words a minute
- 238 words a minute
- 50 words a minute
- 500 words a minute
It is the average from a large review of English non-fiction reading.
Why use several sub-headings?
- They lengthen the post
- They hide errors
- They break up text and help skimming
- They are required
Clear sections suit readers on phones.
What is the problem with editing while you draft?
- You stop often and nothing flows
- It is faster
- It saves time
- It is required
Draft first, then edit.
Summary
- Give a post a reader, a promise and a shape.
- Write the headings first, then fill each section.
- Short sentences and plain words make reading easy.
- Length should fit the topic, not a number.
Questions
Where does 238 words a minute come from?
It is the average silent reading rate for adults in English non-fiction in a 2019 review of 190 studies by Marc Brysbaert. Most adults fall between roughly 175 and 300, so treat it as an estimate.
Is the reading ease score exact?
No. The formula is well known, but the syllable counting in the program is a rough rule. Treat it as a guide, and trust your own reading.
Is the draft real?
It is a made-up sample post to show the method.
