A Tour of the Editor: Canvas, Panels and Alignment
Learn the parts of the Canva editor, how positions and layers work, and how to centre and space items exactly, with a real program that does the maths.
In this lesson you will
- Name the main parts of the editor
- Understand positions from the top left corner
- Centre and space items evenly
- Use layers, groups and guides
About 18 minutes
Where is everything?
Meera’s blank portrait page is open. She sees a big white rectangle surrounded by buttons and panels, and her first thought is to close it and go back to the poster she could draw by hand. If this is how you feel when you open any new program, you are normal. The cure is a tour. Once you can name the parts of the editor, it stops looking like a cockpit and starts looking like a desk.
The parts of the editor
The layout differs a little between the website and the phone app, and it changes over time, so treat this list as a map of ideas:
- The canvas is the page in the middle. Whatever is on it is your design. Whatever hangs off the edge will be cut off when you download.
- The side panel is where you find templates, elements such as shapes and icons, text styles, uploads and backgrounds. You click an item to add it to the page.
- The toolbar sits above the canvas and changes depending on what you have selected. Select a piece of text and it shows font and size controls. Select a photo and it shows crop and effects.
- The menu bar has the name of the design, file actions, resize and sharing and download.
- Pages are shown below or beside the canvas, so you can add more than one page to a design, for example a set of slides.
- Zoom controls let you see the whole page or look closely at one corner.
Three habits repay themselves from day one. First, click an item and look at what the toolbar shows, because the controls change with the item. Second, use undo freely, since nothing you do on the canvas is permanent until you download. Third, give your design a clear name, because ‘Untitled design’ becomes impossible to find once you have twenty.
The canvas is a grid of pixels
Every item on the canvas has a position and a size. The position is measured from the top left corner of the page, which is the starting point, called the origin. The first number says how far across, the second how far down. This surprises people who remember graphs from school, where the vertical number goes up. On a screen, the vertical number goes down.
You rarely type these numbers, because you drag items and the editor shows coloured guide lines when something lines up with the page or with another item. But understanding the numbers helps you see why two things look slightly off: if one headline starts 70 pixels from the left and a paragraph under it starts 96, the eye notices even if the brain does not.
The program below places things exactly. It centres a box, spaces three cards evenly, and shows how big the page looks at different zoom levels. The page is 1080 by 1350 pixels, Meera’s portrait shape. Everything printed is the real result of running the code.
canvas_w, canvas_h = 1080, 1350 # origin (0, 0) is the TOP LEFT corner
def center_x(box_w):
return (canvas_w - box_w) / 2
def distribute(count, box_w, left=90, right=90):
free = (canvas_w - left - right) - count * box_w
gap = free / (count - 1)
return [round(left + i * (box_w + gap), 1) for i in range(count)], round(gap, 1)
title_w = 800
print("title x:", center_x(title_w))
xs, gap = distribute(3, 270)
print("cards x:", xs)
print("gap:", gap)
# check: every gap really is the same
gaps = [round(xs[i + 1] - (xs[i] + 270), 1) for i in range(2)]
print("measured gaps:", gaps)
# zoom: how big does the canvas look on screen?
for zoom in (25, 50, 100):
print(f"zoom {zoom}%: {canvas_w * zoom / 100:.0f} x {canvas_h * zoom / 100:.0f}")
title x: 140.0
cards x: [90.0, 405.0, 720.0]
gap: 45.0
measured gaps: [45.0, 45.0]
zoom 25%: 270 x 338
zoom 50%: 540 x 675
zoom 100%: 1080 x 1350
The centre rule is simple: the space on the left should equal the space on the right, so the left edge is the page width minus the box width, divided by two. For the title of 800 pixels, that gives 140. For the three cards, the free space is shared into equal gaps, and the program measured them afterwards to prove each is 45 pixels. Last, zoom only changes how big the page looks to you: at 270 pixels wide on screen it is still a 1080 pixel design.
In the editor you do the same thing without the maths. Select several items and use the align and distribute controls in the toolbar or the position panel. The result is the same as the calculation, only quicker.
Layers and selection
Items can sit on top of each other, like sheets of paper on a desk. The order is called the layer order. A photo can sit behind a block of text, and the text stays readable because it is in front. If you cannot click something, it is probably underneath something else. Use the controls that move an item forward or backward, or the layers view if your version has one.
You can select several items at once by dragging a box around them or holding a key while clicking, and then move, resize or align them together. You can also group items so they behave as one. Grouping is useful for a logo made of several pieces or a card made of a box and some text.
Dragging a corner handle of a photo or group and distorting it. Always use the corner handles to resize while keeping the shape, and avoid the side handles on photos, which stretch them. If something already looks squashed, undo and resize again from the corner.
Coloured guide lines mean the item is lined up with the page centre, the margins or another item. They are your free alignment helper, so slow down when they appear.
Practice for this lesson
Check what you learned
Five quick questions. Pick an answer and you will see straight away whether it is right and why.
Where is the origin, the starting point for positions?
- The centre of the page
- The top left corner of the page
- The bottom right corner
- The first font
Positions are measured from the top left corner, and the vertical number goes down.
How do you centre a box across the page by calculation?
- Half the box width
- Page width plus box width
- Box height divided by two
- Page width minus box width, divided by two
Equal space on both sides means the left gap is (page width – box width) / 2.
What does zooming in the editor change?
- The size of the design
- How big the page looks to you
- The colours
- The file type
Zoom only changes your view, not the pixel size of the design.
You cannot click an item. What is a likely cause?
- It is deleted
- It is too colourful
- The page is full
- Something is on top of it
Items stack in layers, so something above may be covering the one you want.
Which handle is safe for resizing a photo without distortion?
- A corner handle
- A side handle
- Any handle
- None of them
Corner handles keep the shape, while side handles stretch a photo out of proportion.
Summary
- The canvas, side panel, toolbar and pages are the main parts of the editor.
- Positions are measured from the top left, and the vertical number goes down.
- Centre by (page – box) / 2 and share free space into equal gaps.
- Items stack in layers, and corner handles resize without distortion.
Questions
Can I undo mistakes?
Yes. Undo is available as you work, and nothing is final until you download. Version history may also let you go back to earlier saved versions.
Why does my text not line up with another item?
It is probably a few pixels off. Select both and use the align controls, or look for coloured guide lines as you drag.
Does zooming change my design?
No. Zoom changes only how big the page looks on your screen. The design keeps its real size.
