IntermediateLesson 15 of 306 min read

Presentations: Slides That Help the Speaker

Learn what makes a slide work, how to measure how much text a slide can hold, how to estimate talk time, and how to present safely, with a real text-fit checker.

In this lesson you will

  • Design one idea per slide
  • Test how much text a slide can hold
  • Estimate talking time
  • Know the presenting modes and the sharing risks

About 22 minutes

Priya’s slide has a hundred and eighty-eight words

Priya is asked to present the reading club plan to the library committee. She opens a presentation, types everything she wants to say into one slide, and shrinks the text until it fits. The slide looks like a page from a legal contract. The committee reads it silently while she talks, and then asks about things she said out loud. A presentation slide is not a document. It is a backdrop for a person speaking, and its job is to help the audience follow her, not to replace her.

What makes a slide work

  • One idea per slide. If you need the word ‘and’ in the title, you probably need two slides.
  • Few words. Aim for a title and a handful of short points, not paragraphs. If the audience must read, they stop listening.
  • Big type. The back row has to read it. Bigger text forces fewer words, which is the point.
  • Consistent layout. The title sits in the same place on every slide and the margins match, so the audience does not need to relearn the page each time.
  • Pictures with a job. A chart, a photo or a diagram should say something that words would say badly.

Canva and presentations

Canva has a presentation design type with a wide 16:9 shape, 1920 by 1080 pixels at its usual size. It also offers ways to present: Canva’s help describes full screen, presenter view with notes and upcoming slides, a mode that records you presenting, and autoplay. A timer is available on a computer, and you can press a number key such as 5 for a five-minute timer. As always, which modes and tools appear depends on your device and plan, so check your screen.

One important safety tip from Canva’s own help pages: if you share a design with a public link, people may be able to see content that is not obviously visible, such as hidden pages, cropped parts of pictures and presenter notes. If your notes contain anything private, check before sharing.

Measuring how much a slide holds

The program below does something presenters rarely do: it measures. Given the text of each slide, it finds the largest font size, from 64 pixels down, at which the text fits inside a 1600 by 640 pixel text area with comfortable line spacing. Slides that need a small size are flagged as dense. It also adds up the words and estimates the talking time, using the common rule of thumb that people speak at about 130 words a minute. That pace varies a lot between speakers, so treat it as a rough guide only.

from PIL import ImageFont
import os

F = next(p for p in ("/usr/share/fonts/truetype/google-fonts/Poppins-Regular.ttf",
                     "/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf") if os.path.exists(p))
BOX_W, BOX_H = 1600, 640          # text area of a 1920 x 1080 slide

def wrap_lines(text, font):
    out = []
    for para in text.split("\n"):
        line = ""
        for w in para.split():
            t = (line + " " + w).strip()
            if font.getlength(t) <= BOX_W:
                line = t
            else:
                out.append(line); line = w
        out.append(line)
    return out

def best_size(text):
    for size in range(64, 19, -2):
        n = len(wrap_lines(text, ImageFont.truetype(F, size)))
        if n * size * 1.35 <= BOX_H:
            return size
    return None

slides = {
    "1 title":   "Autumn Bake Sale\nHelp the library",
    "2 plan":    "Saturday 10 June\nParkside Village Hall\n10am to 2pm",
    "3 dense":   ("We will need volunteers to bake, to run the tables, to count the "
                  "money, to set up chairs, to put up posters, to bring tea and "
                  "coffee, to clear up, to take photographs for the website and "
                  "to thank every person who comes along on the day. " * 4),
    "4 split a": "Before: bake, posters and chairs",
    "5 split b": "On the day: tables, money, tea and clean-up",
}
total = 0
for name, text in slides.items():
    n = len(text.split())
    total += n
    size = best_size(text)
    print(f"slide {name}: {n} words, {size} px {'DENSE' if size < 48 else 'ok'}")
print()
print("total words:", total)
print(f"talk time at 130 words/min: {total / 130:.1f} min")
slide 1 title: 6 words, 64 px ok
slide 2 plan: 9 words, 64 px ok
slide 3 dense: 188 words, 38 px DENSE
slide 4 split a: 5 words, 64 px ok
slide 5 split b: 8 words, 64 px ok

total words: 216
talk time at 130 words/min: 1.7 min

Most slides sit comfortably at the 64 pixel limit: the title slide, the plan slide and the two short slides. The dense slide holds 188 words, and the program had to shrink it to 38 pixels, which is why it is flagged. At the size of a projector screen in a room, that text is too small for the back row, and the audience would have to read instead of listen. The sensible fix is to split it. Slides 4 and 5 show how: one covers what happens before the day, the other what happens on the day, each with a few words at full size.

The total across all five slides is 216 words, which would take about 1.7 minutes at 130 words a minute. That is a useful check: a ten-minute talk with only three or four short slides will feel rushed in the other direction, while forty dense slides in ten minutes will be unreadable. A common rough guide is about one to two minutes per slide, but it depends entirely on the content.

Putting a talk together

  1. Write the message in one sentence. If you cannot, you are not ready to make slides.
  2. List three to five main points. Each becomes a section.
  3. Make one slide per idea. Put your spoken detail in the presenter notes, not on the slide.
  4. Choose one layout and use it throughout. Keep text large, and use the brand colours.
  5. Rehearse with the timer. Cut slides, not speed.
  6. Test on the actual screen if you can. Colours and small text look different on a projector.
Common mistake: reading the slide

Reading the slide aloud. If the words on the slide are the same as the words you say, the audience reads faster than you speak and loses interest. The slide should show the headline and the picture, while you say the story.

Slides versus handouts

Handouts are different. A document people read on their own can hold much more text than a slide. Make a separate document for detail, and keep the slides for the talk.

Open an old presentation. Count the words on each slide. Find the three most crowded and split each in two, moving the extra words into presenter notes. Check the title position is the same on every slide.

Practice for this lesson

Check what you learned

Five quick questions. Pick an answer and you will see straight away whether it is right and why.

What is a good rule for slide content?

  1. As many ideas as fit
  2. No titles
  3. One idea per slide
  4. Only paragraphs

One idea per slide keeps the audience following the speaker.

Why was the dense slide flagged?

  1. It needed a small font to fit
  2. It had no title
  3. It was in colour
  4. It was the first slide

Too many words forced a small font, which the back row could not read.

What is a good fix for a crowded slide?

  1. Shrink the text more
  2. Split it into several slides
  3. Remove the margin
  4. Use all capitals

Splitting keeps the text large, and spoken detail can go in presenter notes.

Roughly how fast do people speak, as used in the program?

  1. About 13 words a minute
  2. About 1300 words a minute
  3. About 3 words a minute
  4. About 130 words a minute

A common rule of thumb is around 130 words a minute, but speakers vary.

What can a public link to a design reveal?

  1. Only the first slide
  2. Hidden content and presenter notes
  3. Nothing at all
  4. Your password

Canva’s help warns that public links may expose hidden pages, cropped images and notes.

Summary

  • A slide is a backdrop for a speaker, with one idea and few words.
  • Measure text fit: if a slide needs small type, split it.
  • About 130 words a minute is a rough guide to speaking time.
  • Public links can expose hidden content and presenter notes.

Next lesson

Lesson 16 moves to social media: carousels and series that match.

Questions

How many words should be on a slide?

As few as work. A title and a handful of short points is typical. If you must shrink the text to fit, there are too many.

Should I put my script in the notes?

Put short prompts in the notes rather than a full script, and check notes before sharing a public link, because they may be visible.

Can I present without internet?

Canva's help describes offline presenting for some cases, depending on device and plan. Download a copy as a backup before an important talk.

Progress is saved in this browser.