Print Production: Bleed, Paper Sizes and Resolution
Learn trim, bleed and safe area, work out an A5 print file in millimetres and pixels, understand why A paper sizes share one ratio, and estimate the resolution you need.
In this lesson you will
- Explain trim, bleed and safe area
- Calculate print file sizes in mm and pixels
- Understand the A paper series
- Estimate dots per inch from viewing distance
About 25 minutes
The flyers came back with a white edge
The library’s festival flyers have arrived from the printer, and Meera’s heart sinks. Along one edge of every sheet there is a thin white line, and on the other edge the purple background is cut right up against the title. The design looked perfect on screen. What went wrong is not a design error but a production error, and it is one of the most common in print. Paper is cut by machines, machines have tolerances, and a design that ignores them will show it. This lesson explains how professionals prepare files for the printer, and why paper sizes and resolution follow rules you can calculate.
Trim, bleed and safe area
- Trim is the finished size of the piece, where the blade is meant to cut.
- Bleed is extra picture beyond the trim, so that if the blade lands slightly off, there is colour and not bare paper. Many printers ask for 3 millimetres on every side, and in the United States the equivalent is often 0.125 inch, but every printer has its own requirement, so always check.
- Safe area is a margin inside the trim where text and logos must stay, so that a slightly off cut does not slice them. Guides often suggest 3 to 5 millimetres inside the trim, and a larger margin looks better on a busy design.
Canva’s own approach, as described by print guides, is to turn on a view of the print bleed in the design’s settings and then download as a PDF for print with crop marks and bleed selected. The exact names and which options appear depend on your version, design type and plan, so confirm with Canva’s help pages and your printer before you send the job.
Working it out for an A5 flyer
The program below calculates the numbers for an A5 flyer, which measures 148 by 210 millimetres. It adds the bleed, works out the safe area, and converts millimetres to pixels at 300 dots per inch, the usual goal for sharp print that you met in lesson 7. The bleed and safe values in the code are common figures, not rules, so replace them with your printer’s. The second part of the program builds the whole A series of paper sizes from a single starting size, and the third works out how many dots per inch you actually need.
import math
BLEED, SAFE = 3, 5 # millimetres: common values, confirm with your printer
MM_IN = 25.4
def with_bleed(w, h):
return w + 2 * BLEED, h + 2 * BLEED
def px(mm, dpi):
return round(mm / MM_IN * dpi)
trim = (148, 210) # A5
full = with_bleed(*trim)
print("A5 trim:", trim, "mm")
print("with bleed:", full, "mm")
print("safe area:", (trim[0] - 2 * SAFE, trim[1] - 2 * SAFE), "mm")
print("at 300 dpi:", (px(full[0], 300), px(full[1], 300)), "px")
mb = px(full[0], 300) * px(full[1], 300) * 3 / 1e6
print(f"uncompressed RGB: {mb:.1f} MB")
# the A series: start from A0 and halve the long side each step
w, h = 841, 1189
print()
for n in range(0, 7):
print(f"A{n}: {w} x {h}, ratio {h / w:.3f}")
w, h = h // 2, w
print("square root of 2:", f"{math.sqrt(2):.3f}")
# how many dots per inch do you need? about 3438 / viewing distance in inches
print()
for dist_in, label in ((12, "a handout"), (36, "a wall poster"), (120, "a banner")):
print(f"{label}: about {3438 / dist_in:.0f} dpi")
A5 trim: (148, 210) mm
with bleed: (154, 216) mm
safe area: (138, 200) mm
at 300 dpi: (1819, 2551) px
uncompressed RGB: 13.9 MB
A0: 841 x 1189, ratio 1.414
A1: 594 x 841, ratio 1.416
A2: 420 x 594, ratio 1.414
A3: 297 x 420, ratio 1.414
A4: 210 x 297, ratio 1.414
A5: 148 x 210, ratio 1.419
A6: 105 x 148, ratio 1.410
square root of 2: 1.414
a handout: about 286 dpi
a wall poster: about 96 dpi
a banner: about 29 dpi
For A5, the file with bleed measures 154 by 216 millimetres, three millimetres added on each of the four sides. The safe area, using a five millimetre safe margin, is 138 by 200 millimetres. At 300 dots per inch, the bleed size is 1819 by 2551 pixels, which is a little larger than the 1748 by 2480 pixel trim size used for the flyer in lesson 20. Stored as an uncompressed picture with three colour channels, that is about 13.9 megabytes, which shows why print files are large and why photos for print must start as big originals, as lesson 7 explained.
Why paper sizes work the way they do
The middle of the output lists A0 to A6. Look at the ratio column: it is always about 1.414, the square root of 2. That is not a coincidence. The international standard for paper sizes, ISO 216, sets every A size to this ratio because of a neat property: cut a sheet in half across its long side and each half has the same shape as the whole. A4 halves into two A5 sheets, A3 into two A4s, and so on. That is why a photocopier can enlarge A4 to A3 without any cropping. The program builds the series by starting with A0, which is 841 by 1189 millimetres, and halving the long side at each step, rounding down to whole millimetres. The numbers match the standard’s published sizes, including A4 at 210 by 297 and A5 at 148 by 210. The small differences in the ratio column, from 1.410 to 1.419, are just the effect of rounding to whole millimetres.
North America mostly uses different sizes, such as Letter, 8.5 by 11 inches, which do not share this property. If your work crosses borders, check which size each country’s printers expect.
How many dots per inch do you really need?
The last lines of the program use a rule of thumb from how sharp human eyes are: the dots per inch needed is roughly 3438 divided by the viewing distance in inches. For a handout held at about 12 inches, that comes to about 286 dpi, which is why 300 is the standard goal. For a wall poster seen from about 3 feet, it is about 96 dpi. For a banner seen from about 10 feet, it is only about 29. This is why a banner can be made from a much smaller file than a flyer, and why a photo that is soft on a flyer may be fine on a large poster. It is an approximation, so use it to judge, not to decide: your printer’s guidance comes first.
Colour for print
Screens mix light, and printers mix ink, so some very bright screen colours, especially vivid purples and pinks, cannot be printed exactly. Canva’s help suggests using CMYK colours when you intend to print, and a CMYK option for print PDFs is offered on some paid plans. Print a small test before a big run and compare it with your screen. Keep text away from the safe-area edge, and do not rely on very light tints, which can disappear on paper.
Sending the screen version to the printer. A file without bleed or crop marks, sized to the trim, invites a white edge or a lost letter. Prepare a separate print version, ask the printer for their specification, and proof it.
Put the bleed requirement, the safe margin and the file type in your project brief, so everyone prepares the right file the first time.
Practice for this lesson
Check what you learned
Five quick questions. Pick an answer and you will see straight away whether it is right and why.
What is bleed?
- A paper colour
- A font setting
- Extra picture beyond the trim line
- The margin inside the trim
Bleed extends the design past the cut so a slightly off trim shows no white edge.
What is the aspect ratio of A-series paper?
- Exactly 2
- Exactly 1
- About 3
- About 1.414, the square root of 2
Every A size has a ratio of about the square root of 2, so halving keeps the shape.
How big is an A5 file with 3 mm bleed?
- 148 by 210 mm
- 154 by 216 mm
- 142 by 204 mm
- 160 by 230 mm
Adding 3 mm on each side makes A5 grow from 148 by 210 to 154 by 216.
Why does a banner need fewer dots per inch than a flyer?
- Banners are smaller
- Banners use less ink
- It is viewed from much further away
- Banners are in colour
The further away it is seen, the fewer dots per inch the eye can tell apart.
What should you do before sending a job to a printer?
- Ask for their file specification
- Guess the bleed
- Send the screen file
- Flatten the colours
Each printer has its own requirements for bleed, safe area, colour and file type.
Summary
- Add bleed beyond the trim and keep text inside the safe area.
- A5 with 3 mm bleed is 154 by 216 mm, or 1819 by 2551 pixels at 300 dpi.
- A paper sizes share the ratio of the square root of 2.
- Always follow your printer’s specification and proof a test.
Questions
How much bleed do I need?
Many printers ask for 3 millimetres, or 0.125 inch in the United States, but large formats often need more. Always ask your printer.
Does Canva add bleed for me?
Canva's help and print guides describe showing a print bleed in the design settings and downloading a print PDF with crop marks and bleed. Names and availability vary, so check your version.
Why do printed colours look duller?
Screens mix light and printers mix ink, so some bright screen colours cannot be matched. Using CMYK colours and printing a test helps.
