Text and Fonts: Making Words Easy to Read
Learn hierarchy, font pairing, type scales and line length, and test how your text will look on a phone, with a real font measurement.
In this lesson you will
- Create a clear hierarchy
- Choose and pair fonts
- Build a type scale
- Check text on a phone and set line length
About 20 minutes
Why can nobody read Meera’s flyer?
Meera’s Instagram post looks lovely on her laptop. Then she sends it to her sister’s phone and gets a message back: ‘Pretty! What does the small bit say?’ On a laptop, Meera was looking at the design at a big size. On a phone, the same design shrinks to about the width of a hand, and the small text becomes a smudge. Text is the part of a design that people have to do something with, namely read it. If they cannot, the design has failed, however pretty it is.
Hierarchy: what to read first
Good text design starts with hierarchy, meaning a clear order of importance. A reader should be able to tell in a second what is the title, what is the key information and what is detail. You create hierarchy mainly with size, weight (thin to bold) and colour. A rule of thumb for beginners: use three levels at most, such as a big title, a medium subheading and small body text. More than that and nothing stands out.
Choosing fonts
- Use two fonts at most. One for headings and one for body text is enough. Many good designs use only one font in different weights.
- Pair opposites. A bold heading font with a plain, simple body font works well. Two fonts that are nearly the same just look like a mistake.
- Prefer clear shapes for small text. Decorative or script fonts can be lovely for a short title and unreadable in a paragraph.
- Keep to the template’s pairing if you are not sure. Designers chose it on purpose.
- Check font licences if you upload your own font, and note that some fonts may depend on your plan.
A type scale: sizes that belong together
Picking sizes at random leads to a mess. A type scale gives each level a size by multiplying the one before it by a fixed number, called the ratio. A ratio of 1.25 gives a gentle step up each time. Start from a base body size, divide for the small text, multiply for each heading level, and you have a family of sizes that look related.
There is a second, practical question: how big will this text look on the screen where it is read? A post of 1080 pixels wide shown on a phone about 390 pixels wide is shrunk to about 36 per cent of its size. The program below builds a scale from a base of 40 pixels and shows the phone size of each level. Then it measures how many characters fit on a line, using a real font. The font and phone width are examples.
from PIL import ImageFont
import os
def find_font(names):
for f in ["/usr/share/fonts/truetype/google-fonts", "/usr/share/fonts/truetype/dejavu"]:
for n in names:
if os.path.exists(os.path.join(f, n)):
return os.path.join(f, n)
REG = find_font(["Poppins-Regular.ttf", "DejaVuSans.ttf"])
base, ratio = 40, 1.25
names = ["caption", "body", "subheading", "heading", "title"]
sizes = [round(base / ratio) , base, round(base * ratio), round(base * ratio ** 2), round(base * ratio ** 3)]
phone_scale = 390 / 1080 # a 1080 px wide post shown on a 390 px wide phone screen
print("role size on phone")
for n, s in zip(names, sizes):
print(f"{n:12} {s:>3} px {s * phone_scale:4.1f} px")
sample = "Fresh bread, cakes and cookies baked by neighbours, all sold to help the library."
for s in (30, 40, 56):
font = ImageFont.truetype(REG, s)
per_char = font.getlength(sample) / len(sample)
fit = int(900 / per_char)
print(f"size {s}: {fit} characters")
role size on phone
caption 32 px 11.6 px
body 40 px 14.4 px
subheading 50 px 18.1 px
heading 62 px 22.4 px
title 78 px 28.2 px
size 30: 61 characters
size 40: 45 characters
size 56: 32 characters
The scale runs 32, 40, 50, 62 and 78 pixels. On the phone, the body text is shown at about 14 pixels, which is comfortable, and the smallest caption at about 12, which is close to the lower end. Many designers aim to keep important text at or above roughly 14 pixels on a phone, and treat anything much smaller as decoration. There is no single rule, but the exercise shows why text that is generous on your laptop can be tiny on someone’s phone.
Line length and spacing
The second part of the output measures line length. At 30 pixels, about 61 characters fit across a 900 pixel line, at 40 about 45 and at 56 about 32. Typographers often suggest keeping body text lines between about 45 and 75 characters. Shorter lines feel choppy, and longer lines tire the eye as it hunts for the next line. For social posts, the lines are usually short anyway, but for a flyer or a document the rule helps.
Also give lines room. The distance between lines is called line spacing, and a bit more than the font size, about one and a quarter or one and a half times, reads more easily than cramped lines. Letter spacing can be adjusted too, but for beginners the default is nearly always right.
Alignment and emphasis
- Align text to the left for anything longer than a line or two. Centred text is fine for a short title but hard to read in a block.
- Use bold for emphasis, not capitals, underlining and colour all at once.
- Avoid long text in capitals. It is slower to read.
- Keep the same alignment within a design, so the left edges line up.
Using small text for the most important details, such as the date and place. These are what people came for. Make them the second largest thing on the page, after the title.
You cannot always tell how text will look on a phone by looking at your computer. Zoom the editor out until the page is about the size of a phone, or send the design to your own phone, and look again.
Practice for this lesson
Check what you learned
Five quick questions. Pick an answer and you will see straight away whether it is right and why.
What is hierarchy in a text design?
- A list of fonts
- A kind of colour
- A clear order of importance
- A printing step
Hierarchy tells readers what to read first, usually through size, weight and colour.
How many fonts is a sensible maximum for a beginner?
- Two
- Six
- Ten
- None
Two fonts, or one in several weights, keeps a design tidy and consistent.
Roughly how big does a 1080 px post look on a 390 px phone?
- About 100 per cent
- About 36 per cent
- About 200 per cent
- About 5 per cent
The post is shrunk by 390 divided by 1080, so text becomes about a third of its size.
What line length do typographers often suggest for body text?
- About 5 characters
- About 200 characters
- Any length
- About 45 to 75 characters
Lines of roughly 45 to 75 characters are comfortable, though social posts are often shorter.
What is a good alignment for a paragraph of text?
- Centred
- Left aligned
- Spread out in capitals
- Rotated
Left alignment gives a steady edge, while centred text is tiring over several lines.
Summary
- Hierarchy tells readers what to read first, using size, weight and colour.
- Use two fonts at most, and pair a bold heading with a plain body font.
- A type scale makes sizes feel related, and a phone shrinks them.
- Keep lines around 45 to 75 characters and align longer text to the left.
Questions
Which fonts should I use?
Choose clear fonts for body text, and keep decorative ones for a short title. If you are unsure, use the pairing a template gives you.
What is the smallest text size I should use?
There is no single rule. A useful habit is to check on a phone and keep important text around 14 pixels or larger at that size.
Can I upload my own fonts?
Canva allows custom fonts on some plans. Check your plan and the font licence before using one commercially.
