AdvancedLesson 26 of 306 min read

Motion: Easing, Timing and Captions

Learn why easing makes motion feel natural, compare four curves frame by frame, set sensible timings and time captions for reading, with measured numbers.

In this lesson you will

  • Explain easing and choose a curve
  • Read frame-by-frame steps
  • Set sensible animation timing
  • Time captions for reading

About 25 minutes

Why does it feel like a robot?

Anil animates the festival title sliding onto the screen. It moves at a perfectly steady speed, stops dead and sits there. It looks technical and cheap, a little like a machine part. A friend’s version moves quickly at first, glides to a gentle stop, and looks professional. The two animations travel the same distance in the same time. The difference is not distance or duration but the easing: the way speed changes along the way. This lesson explains easing, then timing, and finally captions, three things that make motion feel considered.

What easing is

Real objects do not start or stop instantly. They accelerate and decelerate. Easing copies that. The common types are:

  • Linear: constant speed. Mechanical, and best for things like loading bars.
  • Ease in: starts slowly and speeds up. Good for something leaving the screen.
  • Ease out: starts fast and slows down. Good for something arriving, because it settles into place.
  • Ease in-out: slow at both ends and quick in the middle. A natural all-rounder.

Canva offers animation styles, transitions and in some cases timing options for elements and pages, and the names, number and controls change with your version and plan. If your version has no easing controls, choose animation styles whose names suggest the behaviour you want, and always preview them. The principles hold anywhere.

Easing as numbers

Each easing is a simple formula that turns time, from 0 at the start to 1 at the end, into position, from 0 to 1. The program below uses four of them to move a title 600 pixels in one second at 30 frames per second, and records the position at every frame. Then it reports, for each curve, the first step, the distance covered in the first frame, and the biggest step. The program ends with a calculation of how long to show captions.

def linear(t): return t
def ease_in(t): return t ** 3
def ease_out(t): return 1 - (1 - t) ** 3
def ease_in_out(t): return 4 * t ** 3 if t < 0.5 else 1 - (-2 * t + 2) ** 3 / 2

FPS, SECONDS, DISTANCE = 30, 1.0, 600
frames = int(FPS * SECONDS)
curves = {"linear": linear, "ease in": ease_in, "ease out": ease_out, "ease in-out": ease_in_out}

print("frames:", frames)
for name, f in curves.items():
    xs = [round(DISTANCE * f(i / frames)) for i in range(frames + 1)]
    moves = [b - a for a, b in zip(xs, xs[1:])]
    print(f"{name}: starts {xs[0]}, ends {xs[-1]}")
    print(f"  biggest step {max(moves)} px, first step {moves[0]} px")

# caption timing: about 3 words a second, never under 1.2 seconds
captions = ["Autumn Bake Sale", "Saturday 10 June, 10am to 2pm at Parkside Village Hall",
            "All money raised helps the library", "Come along"]
t = 0.0
print()
for c in captions:
    dur = max(1.2, len(c.split()) / 3)
    print(f"{t:4.1f}s to {t + dur:4.1f}s: {len(c.split())} words")
    t += dur
print(f"total: {t:.1f} s")
frames: 30
linear: starts 0, ends 600
  biggest step 20 px, first step 20 px
ease in: starts 0, ends 600
  biggest step 58 px, first step 0 px
ease out: starts 0, ends 600
  biggest step 58 px, first step 58 px
ease in-out: starts 0, ends 600
  biggest step 56 px, first step 0 px

 0.0s to  1.2s: 3 words
 1.2s to  4.5s: 10 words
 4.5s to  6.5s: 6 words
 6.5s to  7.7s: 2 words
total: 7.7 s

One second at 30 frames per second is 30 frames, and all four curves start at 0 and end at 600. But look at how they get there. The linear curve moves a steady 20 pixels per frame, so its first and biggest steps are the same. The ease-in curve’s first step is 0 pixels, so it starts from rest, and its biggest step, 58 pixels, comes right at the end, so it arrives at full speed and stops abruptly, which is why ease-in suits exits and not arrivals. The ease-out curve is the mirror image: its first step is the big one, 58 pixels, and it finishes gently. The ease in-out curve starts at 0 pixels per frame, builds to a peak of 56 pixels per frame and slows again. That pattern of small steps, then large ones, then small ones, is what the eye reads as natural.

Timing

  • Short. Movements of around a quarter to half a second feel responsive. Longer than a second feels slow unless it is dramatic.
  • Staggered. Start items one after another, slightly overlapped, rather than all at once.
  • Consistent. Use the same easing and timing for the same kind of movement.
  • Purposeful. Move something to show a relationship or to draw attention, not to decorate.
  • Gentle. Avoid flashing and fast flicker, which can be harmful to some people, and give viewers a way to pause long loops.

Captions and reading time

Many people watch video with the sound off, and captions help people who are deaf or hard of hearing and anyone in a noisy place. The last part of the program times four captions using a rule of thumb of about three words a second, with a minimum of 1.2 seconds. The first caption runs from 0.0 to 1.2 seconds, the second, with 10 words, from 1.2 to 4.5, and so on. The whole sequence takes 7.7 seconds. That tells you that a message of about thirty words needs about ten seconds just to be read, before pauses, which is why short videos need very few words. The three-words-a-second figure is a rough guide: slower for complex words, for children and for second-language viewers.

Common mistake: too much movement

Animating everything. If the title, the photo, the date, the logo and the button all fly in with a different effect, nothing is noticed and the whole thing feels frantic. Animate one or two things and keep the rest still.

Motion is a means, not a goal

Easing cannot rescue a poor idea, and a good still image beats a weak animation. Add motion only when it explains or guides.

Take a simple animation you made in lesson 18. Change one movement so it eases out when it arrives. Watch it on your phone. Then write captions for it, and check that the total time is enough to read them comfortably.

Practice for this lesson

Check what you learned

Five quick questions. Pick an answer and you will see straight away whether it is right and why.

What is easing?

  1. A kind of font
  2. A file size
  3. A page margin
  4. How speed changes during a movement

Easing describes acceleration and deceleration along a movement.

Which easing suits something arriving on screen?

  1. Ease out
  2. Ease in
  3. Linear only
  4. None

Ease out starts fast and slows, so the object settles into place.

What did the linear curve do in the program?

  1. Started at rest
  2. Ended with a big step
  3. Moved the same distance every frame
  4. Skipped frames

A linear curve moves a constant amount per frame, so every step is equal.

Roughly how fast can people read captions, as used here?

  1. About thirty words a second
  2. About one word a minute
  3. About a hundred words a second
  4. About three words a second

A rule of thumb is around three words a second, slower for complex text.

What is a good habit for motion?

  1. Animate everything
  2. Animate one or two things on purpose
  3. Never use motion
  4. Use fast flashing

Selective, purposeful motion guides attention, while constant motion distracts.

Summary

  • Easing changes speed along a movement, and natural motion eases.
  • Ease out suits arrivals, ease in suits exits, and in-out suits most moves.
  • Keep movements short, staggered and consistent, and avoid flashing.
  • About three words a second is a rough guide for caption timing.

Next lesson

Lesson 27 shows how to automate quality control for designs.

Questions

Does Canva have easing controls?

Canva offers animation styles and some timing controls, which vary by version and plan. If there are no easing controls, pick styles by their behaviour and preview them.

How long should an animation last?

Single movements often work at a quarter to half a second. Whole clips depend on the message, and shorter is usually stronger.

Why do captions matter?

Many people watch without sound, and captions help people who are deaf or hard of hearing, as well as viewers in noisy places.

Progress is saved in this browser.