IntermediateLesson 11 of 306 min read

Brand Kits: Colours, Fonts and Logos in One Place

Learn what a brand kit holds, how to choose a five-colour palette, test which colour pairs are safe to use, and make tints, with a real contrast test.

In this lesson you will

  • Explain what a brand kit holds
  • Choose a five-colour palette
  • Test colour pairs and write rules
  • Make tints from a primary colour

About 22 minutes

Three volunteers, three different posters

Meera’s library group has grown. Now there are three volunteers making posters: Meera, her friend Anil and a student called Priya. The book-sale poster comes out in purple. The newsletter uses a bright blue. Priya’s Instagram post has a rounded font nobody else uses, and the logo has been stretched. All three are good designs. Together they look like three different organisations. A visitor who sees one of them will not recognise the next. This lesson is about the fix: a brand kit.

What a brand kit is

A brand is the way an organisation looks and sounds everywhere you meet it. A brand kit is the set of choices written down in one place: the logo files, a small palette of colours, the fonts for headings and body text, and sometimes ready-made templates and a short note on tone of voice. Canva has a Brand Kit area for storing these so that everyone who designs for the group picks from the same shelf instead of guessing.

What the area contains depends on your plan. Canva’s help pages describe Brand Kits as the place to keep logos, colours, fonts and templates, with controls that can restrict a team to the approved colours and fonts. Free accounts may get only a limited version, so check what your account offers before you plan around it. Even if you cannot use the feature, you can still write the same decisions in a simple document and follow them by hand. The thinking matters more than the tool.

What goes into a good palette

  • Primary: the colour that says who you are. Use it for headings, shapes and your logo.
  • Accent: a livelier colour for the one thing you want noticed, such as a button or a date.
  • Ink: a very dark colour for text. Many brands choose a deep navy or purple rather than pure black.
  • Paper: the main background, often white.
  • Soft: a pale tint for panels and calm areas behind text.

Five colours are enough. The goal is not a rich palette but a dependable one, so that anyone can make something on-brand without thinking.

Testing a palette before you commit

A palette is only useful if the colours can be used together. Lesson 6 introduced contrast ratios, and now they do real work. The program below stores a brand as plain data, a name, five colours and two fonts, and then tests it three ways. It checks every colour is a valid six-digit hex code. It measures the contrast of the text pairs you intend to use. And it makes lighter tints of the primary colour by mixing it with white, which gives you extra shades that still belong to the family. The colours here are an example brand for the library group, not a rule.

import re

brand = {
    "name": "Cedar Library",
    "colours": {"primary": "#5A28C8", "accent": "#F06CC2", "ink": "#14112E",
                "paper": "#FFFFFF", "soft": "#EFE9FB"},
    "fonts": {"heading": "Poppins Bold", "body": "Poppins Regular"},
}

def lum(h):
    f = lambda c: c / 12.92 if c <= 0.03928 else ((c + 0.055) / 1.055) ** 2.4
    r, g, b = (f(int(h[i:i + 2], 16) / 255) for i in (1, 3, 5))
    return 0.2126 * r + 0.7152 * g + 0.0722 * b

def contrast(a, b):
    hi, lo = sorted((lum(a), lum(b)), reverse=True)
    return (hi + 0.05) / (lo + 0.05)

def mix(a, b, t):                      # t = share of colour a
    ca = [int(a[i:i + 2], 16) for i in (1, 3, 5)]
    cb = [int(b[i:i + 2], 16) for i in (1, 3, 5)]
    return "#%02X%02X%02X" % tuple(round(x * t + y * (1 - t)) for x, y in zip(ca, cb))

valid = all(re.fullmatch(r"#[0-9A-F]{6}", c) for c in brand["colours"].values())
print("all hex codes valid:", valid)

C = brand["colours"]
pairs = [("ink", "paper"), ("ink", "soft"), ("paper", "primary"),
         ("ink", "accent"), ("paper", "accent")]
for fg, bg in pairs:
    r = contrast(C[fg], C[bg])
    print(f"{fg} on {bg}: {r:.2f} {'ok' if r >= 4.5 else 'NO'}")

print()
for pct in (100, 75, 50, 25):
    tint = mix(C["primary"], "#FFFFFF", pct / 100)
    print(f"primary {pct}%: {tint}, ink {contrast(C['ink'], tint):.1f}")
all hex codes valid: True
ink on paper: 18.27 ok
ink on soft: 15.42 ok
paper on primary: 8.16 ok
ink on accent: 6.64 ok
paper on accent: 2.75 NO

primary 100%: #5A28C8, ink 2.2
primary 75%: #835ED6, ink 3.9
primary 50%: #AC94E4, ink 7.1
primary 25%: #D6C9F1, ink 11.7

Look at the pairs. Ink on paper is 18.27, and ink on the pale panel is easy to read. White text on the primary purple scores 8.16, a comfortable pass. Dark ink text on the pink accent scores 6.64, which also passes. But white text on the pink accent scores only 2.75, a fail. That is a very useful discovery, and it becomes a brand rule: text on the accent colour is always ink, never white. Without the test, one volunteer would have used white on pink and the poster would have been hard to read.

The last four lines are the tints. Mixing the purple with white gives #AC94E4 at half strength and #D6C9F1 at a quarter. Ink text on the quarter tint scores 11.7, so tints make good panel backgrounds. On the full-strength colour ink scores only 2.2, and on the 75 per cent tint 3.9, both under the 4.5 line, so white text is the better choice on those darker shades (the 75 per cent tint only just passes, so check it). Tints are a free way to widen a small palette without leaving the brand.

Logos and fonts

For the logo, keep one clean master file with a see-through background, as lesson 9 explained, and perhaps a version for dark backgrounds. Never stretch it. Resize from a corner, and leave clear space around it equal to at least the height of one letter. For fonts, choose one for headings and one for body text, set sizes for a heading, a subheading and body text, and stick to them. If you upload your own fonts, check the font’s licence, and remember that uploading fonts may depend on your plan.

Putting it to work

  1. Decide the five colours and write the hex codes down.
  2. Test the pairs you will use and write down the allowed combinations, such as ‘ink on paper, ink on accent, white on primary’.
  3. Choose the two fonts and the three sizes.
  4. Store the logo files, and if your plan allows it, enter everything in the Brand Kit area.
  5. Share it. A brand kit nobody opens is just a folder.
Common mistake: palette creep

Adding too many colours. When every campaign adds a new favourite colour, the palette stops working. Add a colour only when an existing one cannot do the job, and remove ones you never use.

Suggested colours need checking

Canva may automatically suggest colours from a logo you upload. Check them before you trust them: they can include unwanted shades and are not tested for contrast.

Write down your own five brand colours. Run the pairs through the program, using your hex codes in place of the sample ones. Which pairs fail? Write those down as ‘never use’ rules for the group.

Practice for this lesson

Check what you learned

Five quick questions. Pick an answer and you will see straight away whether it is right and why.

What is a brand kit?

  1. A kind of printer
  2. Your logos, colours and fonts kept in one place
  3. A photo filter
  4. A paid font

A brand kit stores the visual choices so every design uses the same ones.

How many colours is enough for a brand palette?

  1. About fifty
  2. Exactly one
  3. None
  4. About five

A small, dependable palette of five or so colours is easier to use well.

White text on the pink accent scored a fail. What rule follows?

  1. Use ink text on the accent
  2. Use bigger white text
  3. Use a thinner font
  4. Remove the accent

A failing contrast pair becomes a rule: on the accent colour, text is always ink.

How do you make a tint of a colour?

  1. Mix it with black
  2. Change its font
  3. Mix it with white
  4. Blur it

A tint is a lighter version of a colour made by mixing in white.

What should you do with a logo file?

  1. Stretch it to fit
  2. Redraw it each time
  3. Save it as a tiny JPG
  4. Resize it from a corner without stretching

Resizing from a corner keeps the logo in proportion, so it never looks squashed.

Summary

  • A brand kit keeps logos, colours, fonts and templates in one place.
  • Five colours (primary, accent, ink, paper, soft) are enough.
  • Test every text and background pair, and turn failures into rules.
  • Tints widen a palette without leaving the brand.

Next lesson

Lesson 12 goes deeper into colour: harmony and how to build palettes.

Questions

Do I need a paid plan for a Brand Kit?

Canva's Brand Kit features depend on your plan, and free accounts may have a limited version. You can still write the same decisions in a document and follow them by hand.

Should I use pure black for text?

Not necessarily. A very dark navy or purple on a light background has high contrast and often looks softer. Always test the pair.

How often should I update the brand kit?

Rarely. Its value comes from staying stable. Review it once a year, and change it only when there is a clear reason.

Progress is saved in this browser.