BeginnerLesson 2 of 306 min read

Starting a Design: Design Types and Custom Sizes

Learn three ways to start a design, how custom sizes and units work, what the size limits mean, and what to do when your size is too big, with a real size checker.

In this lesson you will

  • Start a design in three ways
  • Convert inches and millimetres to pixels
  • Understand custom size limits
  • Plan a workaround for sizes that are too big

About 18 minutes

Meera opens a blank page

Meera has her list: a portrait post for Instagram and an A4 flyer. She opens Canva, signs in, and finds herself on the home screen with a search box, a row of design types, and a lot of suggested templates. She types ‘Instagram post’ into the search box and sees a few options. Then she wonders about the flyer: A4 is measured in millimetres, not pixels. How do you set that? This lesson is about the start of every design, and about sizes that are not on the list.

Creating an account and finding your way

You can sign up with an email address or with an existing account from another service. Once you are in, the home screen is your starting point. In general terms, you will find a way to create a new design, a search box for design types and templates, and a place where your earlier designs are kept. Take two minutes to look around before you start, because knowing where your finished work lives saves a lot of hunting later.

Three ways to start

  1. Search for a design type such as ‘Instagram post’ or ‘poster’. Choosing one opens a blank page at a sensible size for that purpose.
  2. Start from a template. You pick a ready-made design and change it. The design arrives with its size already decided.
  3. Enter a custom size. You type your own width and height, in pixels or in other units such as inches, millimetres or centimetres.

A design type is best when the place you are posting to has a standard size, because Canva has already set it for you. A custom size is for everything else, such as a name badge or a banner for a particular frame.

Custom sizes and their limits

When you set a custom size, you pick a unit and enter a width and a height. Canva’s help pages say each side must be at least 40 pixels and no more than 8000 pixels. If you type a number outside the allowed range, the field turns red and a message tells you the limits. Treat that message as the final word, because limits can be changed by Canva and can have extra rules for one side of a design.

The units need a little care. Screens are measured in pixels, but paper is measured in inches or millimetres. To convert, you need to know how many pixels fit in an inch. The web convention is 96 pixels per inch, so one inch is 96 pixels and one millimetre is 96 divided by 25.4, about 3.78 pixels. The program below does this conversion and checks the result against the limits. As before, we ran it exactly as shown.

from fractions import Fraction

LIMIT_MIN, LIMIT_MAX = 40, 8000
PX_PER_UNIT = {"px": 1, "in": 96, "cm": 96 / 2.54, "mm": 96 / 25.4}

def to_px(value, unit):
    return round(value * PX_PER_UNIT[unit])

def check(width, height, unit="px"):
    w, h = to_px(width, unit), to_px(height, unit)
    ok = all(LIMIT_MIN <= side <= LIMIT_MAX for side in (w, h))
    return w, h, ok

for label, w, h, unit in [
    ("Poster 18 x 24 in", 18, 24, "in"),
    ("Flyer A5 148 x 210 mm", 148, 210, "mm"),
    ("Tiny icon 32 x 32 px", 32, 32, "px"),
    ("Wide banner 10000 x 2500 px", 10000, 2500, "px"),
]:
    w_px, h_px, ok = check(w, h, unit)
    print(f"{label}:")
    print(f"  {w_px} x {h_px} px, {'OK' if ok else 'OUT OF RANGE'}")

# Workaround for a size that is too big: design at a smaller size
# with the SAME ratio, then export larger (or scale up later).
target_w, target_h = 10000, 2500
ratio = Fraction(target_w, target_h)
work_w = 8000
work_h = int(work_w / ratio)
scale = Fraction(target_w, work_w)
print()
print(f"ratio {ratio.numerator}:{ratio.denominator}")
print(f"design at {work_w} x {work_h}")
print(f"export scale needed: {float(scale):.3f}x")
Poster 18 x 24 in:
  1728 x 2304 px, OK
Flyer A5 148 x 210 mm:
  559 x 794 px, OK
Tiny icon 32 x 32 px:
  32 x 32 px, OUT OF RANGE
Wide banner 10000 x 2500 px:
  10000 x 2500 px, OUT OF RANGE

ratio 4:1
design at 8000 x 2000
export scale needed: 1.250x

The poster of 18 by 24 inches comes out at 1728 by 2304 pixels, comfortably in range. The A5 flyer of 148 by 210 millimetres is 559 by 794 pixels. That answers Meera’s worry: she never has to do the maths by hand, because Canva accepts millimetres directly, but it is useful to see that the sizes are sensible. The tiny icon of 32 by 32 pixels is rejected because it is under the 40 pixel minimum. The wide banner of 10000 by 2500 pixels is rejected because its width is over the limit.

When the size you need is too big

The last part of the output shows a workaround that Canva’s help pages describe. If your target is outside the limits, make the design at a smaller size with the same ratio, and then scale it up when you export or print. The banner has a ratio of 4:1. Designing it at 8000 by 2000 pixels keeps that shape exactly. To reach the full 10000 pixels you would then need to scale the result up by 1.25 times. Whether you can export at that scale depends on the export options available to your plan, so check the download panel before you commit to the idea.

There is one important point about enlarging. When a design is made of flat colours, text and shapes, scaling up is clean, because those are redrawn at the new size. But a photograph inside the design has a fixed number of pixels, and stretching it makes it look soft. Lesson 7 returns to that.

Common mistake: wrong unit

Entering a number in the wrong unit. A width of 8 means eight pixels if the unit is pixels and eight inches if the unit is inches. Always look at the unit menu before you press the create button.

Resizing later

Canva lets you resize a design after you have made it, and some of the one-click resize tools may need a paid plan. Resizing is convenient, but a very different shape still needs checking by eye, because nothing moves perfectly on its own.

Choose one thing from your list in lesson 1. Work out its size in pixels using the program above, change the numbers at the top, and run it. Note whether it is within the limits. Then start a blank design at that size.

Practice for this lesson

Check what you learned

Five quick questions. Pick an answer and you will see straight away whether it is right and why.

Which start gives you a ready-made size for common places?

  1. Entering random numbers
  2. Choosing a design type
  3. Uploading a photo
  4. Printing a page

A design type opens a blank page at a standard size for that purpose.

Roughly how many pixels are in one inch on the web convention?

  1. 10
  2. 300
  3. 96
  4. 1000

The web convention is 96 pixels per inch, used to convert paper sizes.

A custom field turns red. What does that tell you?

  1. The size is outside the allowed range
  2. The design is saved
  3. The page is printed
  4. Your plan has expired

A red field means the number is too small or too large, and a message gives the limits.

How can you get a design bigger than the allowed size?

  1. Add more pages
  2. Use more colours
  3. Design smaller with the same ratio, then scale up
  4. Change the font

Keep the ratio at an allowed size and scale it up when you export or print.

Why can enlarging a photo in a design be a problem?

  1. A photo has fixed pixels and goes soft
  2. Photos cannot be moved
  3. Photos change colour
  4. Photos lose their names

Stretching a photo beyond its pixels makes it blurry, unlike flat shapes and text.

Summary

  • You can start from a design type, a template or a custom size.
  • Paper units convert to pixels at 96 per inch on the web convention.
  • Canva lists 40 to 8000 pixels as the custom size range, and the app message is final.
  • For a size that is too big, design smaller at the same ratio and scale up.

Next lesson

Lesson 3 is a tour of the editor: canvas, panels, pages and alignment.

Questions

Should I use pixels or inches?

Use pixels for anything seen on a screen and inches or millimetres for anything printed. Canva converts between them, so pick the unit that matches the final use.

Can I change the size after I start?

Yes. You can resize a design, but a very different shape needs checking by eye. Some resize tools may depend on your plan.

What if the limits change?

They can. Treat the message in the app as the final word, and check Canva help for the current numbers.

Progress is saved in this browser.